How to Zero a Scope and Rifle

Written By Alla Levin
February 18, 2021
You Can Listen to This Article Here
Voiced by Amazon Polly

How to Zero a Scope and Rifle

Have you ever wondered what makes it possible to shoot over long distances with accurate precision and hit your target?  Well, a lot of factors are responsible for this and they include the user’s experience, gun type, and the use of the telescope. Scoping is an important part of using a rifle and that is why we have decided to show you some simple steps to zero a scope and rifle.

Most times, a lot of gun users are excited about owning a rifle. If you’re ready to order but you need it right away, gas bb guns ready to ship same day from the UK will be the right choice for you. This is because of its size, and its ability to shoot over long ranges. The features of a rifle can be enhanced by attaching a scope to it. The scope allows you to shoot at any range (whether long or short) with accurate precision.

Some rifles are usually manufactured with in-built scopes while some can be detachable. Knowing how to zero a scope goes a long way in helping one hit the target. Zeroing a scope is easy as it can be learned without stress and delay if you pay close attention to the instructions. In this article, we will give a review of these instructions. Please read on as we explain more.

How to Zero a Scope and Rifle

The following are some basic steps to zeroing a scope on a rifle:

Know Your Gun

Know Your Gun

First things first, it is important that you know your gun type, components, and parts. There is a need to know the different names, and their uses. You also need to be acquainted with all the terms involved in using a gun. Owing to the peculiar nature of guns, it will be a huge risk operating one without adequate knowledge about it. So, even if you are an amateur or professional gun user, always be open-minded to learn about it.

Also, knowing how your rifle works will help you detect if there is an abnormality as you use it. This will go a long way to avert any potential danger. If you need more information about the types of rifles, you can visit

Fix the Scope

Most times, rifle scopes are separate from guns except for highly sophisticated guns that have built-in eyepieces. When it does not come with an in-built telescope, you will have to fix one. This process is not a tedious one as it requires fixing it on the base of the gun. To fix it you need to get a flat surface, place the scope at the top of the rifle, check the base to ensure it is properly mounted, and then tighten the bolts.

The question is…how do you choose the right scope for your rifle? There are a lot of factors to consider, including how much magnification you need, the size of the objective lens, lens coating, and scope reticles, among others. Also, ensure you get your rifle scope from a reputable provider that will give you a bang for your buck.

Attach a Gun Rest

This step is an optional one. A gun rest is usually attached to the button of a rifle to enable it to balance well on any surface. As a result, you will be able to aim at your shot without any error or mishit.

Fill in Pellets

Unlike pistols, which take ammo like these AAC Blackout rounds, you may well find that you need to get your hands on some pellets. These are small spherical projectiles used as weapons inside rifles. You need to get a suitable pellet size to fill the rifle. After filling it, you are now set for zero.

Set the Scope (Zeroing the scope)Set the Scope

Zeroing a scope involves setting a telescope to align with the intended target. However, this requires having a concise knowledge of the functionalities, distance, and telescope settings. Distance is usually calculated on the basis of yards or meters.

Depending on your choice, type of rifle, and professional level, you can set your intended Zero point from 25 yards to 100 yards before going for long distances. If you need more information on distance measurement, you can check here.

After knowing the distance, you intend to reach, click on the top of the scope to adjust the knobs. This can be done by rotating it in anti-clockwise or clockwise directions. As you click, the telescope will increase or decrease in accordance with the intended zeroing distance.

Aim and Shoot

When this is done, you can go ahead to aim and shoot at the target to find out if you got the precise location. This can be done repeatedly until you hit the chosen target. You can also check the user manual to find out more instructions to guide you.

How to Zero a Scope and Rifle: Conclusion

Zeroing a telescope involves several steps and we have outlined them in this article. You must ensure that you maintain your rifle and store it in a good place to avoid any form of malfunctioning when you want to use it. Scoping a rifle is simple and can be done with little effort. You can always seek the help of a gun expert in any area you find difficult.

I Need More

Enter your Email Address to Join the
Gang of Curious and Life Loving

Related Articles